Convert your UET Peshawar CGPA to percentage instantly using the official 4.00 GPA scale from the University of Engineering and Technology, Peshawar. Free, accurate, mobile-friendly, and updated for the 2026 academic session — works for all BSc Engineering, BS, MS, and PhD students across Main, Jalozai, Bannu, Mardan, and Abbottabad campuses in Khyber Pakhtunkhwa.
Enter your CGPA on the UET Peshawar 4.00 scale and get your percentage instantly. Choose direct ×25 proportional mapping or the HEC Pakistan band scheme used for official documents.
UET Peshawar uses a 4.00 GPA scale per the official Rules & Regulations Relating to Admissions, Examinations & Discipline. The university does not publish a single multiplication formula on transcripts — instead it issues a CGPA to Percentage Equivalence Certificate from the Controller of Examinations on request. Two approaches are widely used:
For CGPA 3.20:
Other quick references (Direct ×25): CGPA 2.00 → 50.00%, 2.50 → 62.50%, 3.00 → 75.00%, 3.30 → 82.50%, 3.67 → 91.75%, 3.70 → 92.50%, 4.00 → 100.00%.
A breakdown of the 4.00 GPA scale used at the University of Engineering and Technology, Peshawar — one of Pakistan's premier engineering institutions with over 18,000 alumni.
UET Peshawar uses an HEC-approved 4.00 scale with letter grades A, A-, B+, B, B-, C+, C, C-, D, F. A starts at 85%, D is the minimum pass at 50%, F is below 50%.
UET Peshawar uses absolute grading for laboratory courses and relative grading for theory courses. Raw marks are normalized using class statistics, then distributed across letter grades.
GPA = Σ(Grade Points × Credit Hours) ÷ Σ(Credit Hours). The same formula extends to CGPA across all completed semesters. Higher-credit courses pull your average more.
When you re-register a course at UET Peshawar, both grades appear on the transcript with the RPT symbol, but the highest grade is counted toward CGPA. This is the opposite of GIKI's policy.
Students need CGPA ≥ 2.00 to graduate, plus 800 hours of practical training in a recognised engineering organisation. Civil, Agricultural and Mining Engineering students must also complete a Survey Camp.
Located in Peshawar, Khyber Pakhtunkhwa. HEC recognised, PEC accredited. 18,000+ alumni working across Pakistan and internationally. Multiple campuses including Jalozai, Bannu, Mardan, and Abbottabad.
The official UET grading scale on the 4.00 GPA system, used across UET Peshawar's main and satellite campuses.
| Letter Grade | Grade Points | Marks Range | Qualitative Meaning | Status |
|---|---|---|---|---|
| A | 4.00 | 85 – 100 | Outstanding | Highest |
| A− | 3.70 | 80 – 84.99 | Excellent | Excellent |
| B+ | 3.30 | 75 – 79.99 | Very Good | Very Good |
| B | 3.00 | 70 – 74.99 | Good | Good |
| B− | 2.70 | 65 – 69.99 | Above Average | Good |
| C+ | 2.30 | 61 – 64.99 | Average | Average |
| C | 2.00 | 58 – 60.99 | Satisfactory | Min for Degree |
| C− | 1.70 | 55 – 57.99 | Below Average | Pass |
| D | 1.00 | 50 – 54.99 | Lowest Pass | Pass |
| F | 0.00 | Below 50 | Fail | Fail (Re-register) |
Source: UET Peshawar Rules & Regulations Relating to Admissions, Examinations & Discipline. The same 4.00 scale is used across most UET Pakistan campuses (Lahore, Taxila, Peshawar).
Pre-computed percentage values for common UET Peshawar CGPA scores using both Direct ×25 mapping and HEC Pakistan band scheme.
| CGPA | Direct % (× 25) | HEC Band | Academic Standing | Suitable For |
|---|---|---|---|---|
| 4.00 | 100.00% | 90 – 100% | Excellent | Top MNCs, MS Abroad |
| 3.80 | 95.00% | 90 – 100% | Excellent | Top Recruiters, Fulbright |
| 3.70 | 92.50% | 90 – 100% | Excellent | Distinction |
| 3.50 | 87.50% | 80 – 89% | Excellent | Excellent (Distinction) |
| 3.30 | 82.50% | 80 – 89% | Very Good | Strong Placement |
| 3.00 | 75.00% | 70 – 79% | Very Good | All Engineering Jobs |
| 2.70 | 67.50% | 60 – 69% | Satisfactory | Most Companies |
| 2.50 | 62.50% | 60 – 69% | Satisfactory | Service Companies |
| 2.30 | 57.50% | 50 – 59% | Satisfactory | Some Eligibility |
| 2.00 | 50.00% | 50 – 59% | Min Degree Eligible | Min Pass |
| < 2.00 | < 50.00% | Below 50% | Probation | Probation / Dismissal Risk |
HEC Pakistan band mapping: 3.63–4.00 → 90–100%; 3.25–3.62 → 80–89%; 2.88–3.24 → 70–79%; 2.50–2.87 → 60–69%; 2.00–2.49 → 50–59%; below 2.00 → fail.
UET Peshawar uses a 4.00 GPA scale per its Rules & Regulations Relating to Admissions, Examinations & Discipline. Two approaches are widely accepted: (1) Direct ×25 mapping — Percentage = (CGPA ÷ 4) × 100; and (2) the HEC Pakistan band scheme (3.63–4.00 = 90–100%, 3.25–3.62 = 80–89%, etc.). For official applications (foreign admissions, FPSC, KPK PSC), request an Equivalence Certificate from the UET Peshawar Controller of Examinations.
The highest grade. Per the UET Peshawar Civil Engineering FAQs, if a student with a C+ grade re-registers a course and scores a D, both grades appear on the transcript with the RPT (Repeat) symbol, but the highest grade (C+) is counted toward CGPA. This is the opposite of GIKI's policy, which counts the latest grade. Students receiving F or W are required to re-register the course.
No, they are separate universities. UET Peshawar (located in Khyber Pakhtunkhwa), UET Lahore (Punjab), and UET Taxila (Punjab) are independent institutions with their own administrations, Controllers of Examinations, and academic regulations. However, all three follow similar HEC-approved 4.00 GPA scales with the same letter-grade thresholds (A=85+, A-=80-84, etc.), so conversion formulas are practically identical.
Undergraduate students need a minimum Cumulative Grade Point Average (CGPA) of 2.00 on the 4.00 scale, plus 800 hours of practical training in a recognised government, semi-government, or private engineering organisation. For Agricultural, Civil, and Mining Engineering students, completion of a university-organised Survey Camp is also required (certified by the Chairman, Department of Civil Engineering / Incharge Survey Camp).
You are placed on academic probation at the end of the semester. You must raise your CGPA to 2.00 or above in the next semester. Failing to do so for two consecutive semesters leads to separation (dismissal). A warning is issued if your SGPA falls below 2.00 but CGPA remains ≥ 2.00.
Yes. Students receiving F or W grades must re-register. Students receiving C+ or below may re-register to improve their grade. Regular students can take a maximum of 4 additional credit hours (total ≤ 21 CH including regulars). Ex-Final students can re-register up to 21 CH. Re-registration is allowed in regular Fall/Spring or Summer semesters.
Both, depending on course type. Theory courses typically use relative grading — raw marks are normalized using class statistics (mean, standard deviation), then distributed across letter grades. Laboratory courses use absolute grading with fixed marks-to-grade thresholds. The final letter grades map to the same 4.00 scale points (A=4.0, B=3.0, etc.) regardless of grading method.
General benchmarks: 3.50+ (Distinction, ~87.5%+) opens top MNCs, FAANG-style companies, and prestigious scholarships like Fulbright/HEC Foreign Scholarship; 3.00–3.50 (Very Good) qualifies for most engineering and tech roles including K-Electric, Telenor, Systems Limited, NetSol, Engro; 2.50–3.00 meets most service-company cutoffs. UET Peshawar's strong industry reputation in Pakistan means even 2.7+ CGPA can land good engineering placements.
Yes. UET Peshawar is recognised by the Higher Education Commission (HEC) Pakistan, and its engineering programmes are accredited by the Pakistan Engineering Council (PEC). PEC accreditation is mandatory for engineering practice in Pakistan and for international recognition.
Yes — strongly recommended. For credential evaluation by WES, IQAS, or admissions to US/UK/Canada/Australia universities, request a CGPA to Percentage Equivalence Certificate from the UET Peshawar Controller of Examinations. This document states the official 4.00 scale and provides percentage equivalents, which is what foreign evaluators rely on rather than self-calculated conversions.
Log in to the UET Peshawar Student Portal via uetpeshawar.edu.pk. Your GPA appears for each semester, and your CGPA is shown as the cumulative weighted average on your provisional transcript. For official transcripts and Equivalence Certificates, contact the UET Peshawar Controller of Examinations directly.
Explore other Pakistani-university converters and academic calculators for HEC-compliant grade conversion.
Convert your GIKI (Ghulam Ishaq Khan Institute) CGPA using the official 4.00 scale — similar to UET Peshawar but with non-standard thresholds.
Convert NowConvert your NUST (National University of Sciences and Technology) CGPA using the official HEC 4.00 scale formula.
Convert NowConvert your UET Lahore CGPA to percentage using the same 4.00 scale used across all UET Pakistan campuses.
Convert NowConvert your LUMS (Lahore University of Management Sciences) CGPA to percentage using the official 4.00 scale conversion.
Convert NowGeneral HEC Pakistan CGPA to percentage converter supporting the official band-based mapping for 4.00 scale across all Pakistani universities.
Convert NowReverse your percentage back to CGPA on the 4.00 scale — useful for foreign admissions or HEC scholarship applications.
Convert NowNote: UET Peshawar's 4.00 scale uses standard HEC-approved thresholds. Always request an official Equivalence Certificate from the UET Peshawar Controller of Examinations before submitting transcripts for foreign admissions, FPSC, or PEC-related verification.
Explore our complete collection of CGPA, SGPA, GPA calculators and university-specific converters designed for Pakistani, Indian and international students in 2026.
Explore All Tools