Convert your AKTU CGPA to percentage instantly using the officially notified formula (CGPA − 0.75) × 10 as per AKTU B.Tech Ordinance (Letter No. AKTU/RO/2019/1421, session 2019‑20 onwards). Free, accurate, mobile-friendly, and updated for the 2026 academic session — works for all B.Tech, MBA, MCA, B.Pharm, B.Arch students across 700+ AKTU-affiliated colleges in Uttar Pradesh.
Enter your CGPA below and get your percentage instantly using AKTU's official conversion formula. Choose a preset or use a custom factor if your programme uses a different rule.
AKTU notified the official formula in its B.Tech Ordinance (Letter No. AKTU/RO/2019/1421), effective from the 2019‑20 academic session and continuing into 2026. The formula is equivalent to (CGPA × 10) − 7.5 and is the only conversion accepted on AKTU transcripts, placement portals, and verification letters. Verify with your transcript on the official AKTU portal.
For CGPA 7.60:
Other quick references: CGPA 5.00 → 42.50%, 6.00 → 52.50%, 7.00 → 62.50%, 8.00 → 72.50%, 8.50 → 77.50%, 9.00 → 82.50%, 9.50 → 87.50%, 10.00 → 92.50%.
A quick breakdown of the absolute grading model used by Dr. A.P.J. Abdul Kalam Technical University across all B.Tech, MBA, MCA and B.Pharm programmes.
AKTU follows the UGC-recommended 10-point absolute grading system. Marks are converted to letter grades (A+ to F) based on fixed ranges — no curving, no relative grading.
SGPA = Σ(Credits × Grade Points) ÷ Σ(Credits) for the semester. CGPA is the same calculation extended across all semesters — higher-credit courses pull your average more.
AKTU was renamed from Uttar Pradesh Technical University (UPTU) in 2016. UPTU degrees use the exact same grading and (CGPA − 0.75) × 10 conversion formula.
The percentage is calculated by subtracting 0.75 from your CGPA and multiplying by 10. So CGPA 8.00 = 72.50%, not 80% — a common student mistake.
The minimum passing grade is 'D' (5 grade points, 45-49% marks); 'E' (4 points, 40-44%) is conditional pass per ordinance. F (below 40%) = fail. CGPA 5.0+ required for degree.
The same formula applies to all AKTU-affiliated colleges including HBTU Kanpur, MMMUT Gorakhpur, KNIT Sultanpur, IET Lucknow, KIET, JSS Noida, ABES, Galgotias, and others.
The official AKTU absolute grading scale — letter grade, grade points, marks range, and qualitative meaning as per the B.Tech Ordinance.
| Letter Grade | Grade Points | Marks Range | Qualitative Meaning | Status |
|---|---|---|---|---|
| A+ | 10 | 90 – 100 | Outstanding | Top Tier |
| A | 9 | 80 – 89 | Excellent | Excellent |
| B+ | 8 | 70 – 79 | Very Good | Very Good |
| B | 7 | 60 – 69 | Good | Good |
| C | 6 | 50 – 59 | Average | Average |
| D | 5 | 45 – 49 | Below Average (Pass) | Pass |
| E | 4 | 40 – 44 | Marginal (Conditional Pass) | Conditional |
| F | 0 | 0 – 39 | Fail | Fail |
Source: AKTU B.Tech Ordinance (Section 14.1). SGPA and CGPA are rounded to 2 decimal places on official transcripts.
Pre-computed AKTU percentage values for common CGPA scores using the official (CGPA − 0.75) × 10 formula.
| CGPA | AKTU Percentage | Letter Grade | Division | Suitable For |
|---|---|---|---|---|
| 10.00 | 92.50% | A+ | Distinction | Top MNCs, MS Abroad |
| 9.50 | 87.50% | A+ / A | Distinction | Top MNCs, GATE |
| 9.00 | 82.50% | A | First Class with Distinction | Excellent |
| 8.50 | 77.50% | A / B+ | First Class with Distinction | Excellent |
| 8.00 | 72.50% | B+ | First Class | Product / Service IT |
| 7.50 | 67.50% | B+ / B | First Class | All IT Service Cos |
| 7.00 | 62.50% | B | First Class | Service Companies |
| 6.50 | 57.50% | B / C | Second Class | Most IT Service Cos |
| 6.00 | 52.50% | C | Second Class | Some Service Cos |
| 5.50 | 47.50% | C / D | Pass Class | Below cutoffs |
| 5.00 | 42.50% | D | Pass | Degree Eligible |
| < 5.00 | < 42.50% | D / E / F | Below Pass / Fail | Re-attempt needed |
Division thresholds: First Class with Distinction ≥ 75%, First Class ≥ 60%, Second Class ≥ 50%, Pass Class ≥ 40%.
The official formula is Percentage = (CGPA − 0.75) × 10, as notified by AKTU in its B.Tech Ordinance vide Letter No. AKTU/RO/2019/1421, effective from the 2019‑20 academic session and continuing into 2026. Mathematically it's equivalent to (CGPA × 10) − 7.5. So a CGPA of 7.60 = (7.60 − 0.75) × 10 = 68.50%. This applies to all B.Tech, MBA, MCA, B.Pharm and B.Arch programmes across 700+ AKTU-affiliated colleges.
Yes. Uttar Pradesh Technical University (UPTU) was officially renamed Dr. A.P.J. Abdul Kalam Technical University (AKTU) in 2016 in honour of the former President of India. The grading scale and conversion regulations remained unchanged. UPTU degrees use the same (CGPA − 0.75) × 10 formula, although very old pre-CBCS batches may have used a different scheme — check your specific batch ordinance.
The 0.75 subtraction adjusts for the fact that AKTU's grade-point intervals are wider than a pure 1:10 mapping. Grade D (5 points) corresponds to 45-49% marks, not 50%. The 0.75 offset aligns the CGPA scale with actual percentage ranges. The same formula is used by VTU, SPPU, and GGSIPU for the same reason.
No. While ×9.5 is the CBSE/UGC standard for some 10-point CBCS universities, it is not the official AKTU formula. AKTU specifically notified (CGPA − 0.75) × 10 in 2019. Using ×9.5 typically inflates your percentage by 3-4 points and may be flagged during recruitment or admissions verification. Always use the AKTU formula on official forms.
No — the conversion formula (CGPA − 0.75) × 10 is uniform across all AKTU programmes (B.Tech, MBA, MCA, B.Pharm, B.Arch, M.Tech and integrated programmes). The grading scale (A+ to F) and credit system are also the same. Only the total programme credits differ by course.
You need a minimum SGPA of 4.0 in each semester (i.e., no F grades), and your final CGPA must be ≥ 5.0 to be eligible for the degree. F grade in any course = fail, and you'll need to clear it via carry-over, supplementary, or improvement exams as per the ordinance.
Use the credit-weighted formula: CGPA = Σ(SGPA × Semester Credits) ÷ Σ(Total Credits). For example, if Sem 1 SGPA is 7.5 with 26 credits and Sem 2 SGPA is 8.0 with 24 credits, then CGPA = (7.5 × 26 + 8.0 × 24) ÷ 50 = (195 + 192) ÷ 50 ≈ 7.74. Simple averaging (without credit weighting) is the most common student mistake — avoid it.
General benchmarks: 8.0+ (72.5%+) opens product companies and core engineering roles; 7.0 – 8.0 (62.5% – 72.5%) is good for most IT service companies like TCS, Infosys, Wipro, Cognizant, HCL, Accenture; 6.5 – 7.0 meets most service-company cutoffs. Below 6.5 (57.5%) may face restrictions during on-campus drives.
Log in to the AKTU official portal (aktu.ac.in) → Student Services → Result. Your SGPA appears for each semester, and your CGPA is shown as the running cumulative average. The final CGPA also appears on your consolidated marksheet and degree certificate. Both are rounded to 2 decimal places per ordinance.
Always keep two decimal places for placement forms, government job applications (UPSC, SSC, IBPS, RRB), and foreign admissions. CGPA 7.45 → (7.45 − 0.75) × 10 = 67.00% — don't round to 67.5% or 67%. AKTU itself rounds CGPA to 2 decimals, so your percentage should follow the same precision.
Yes. For credential evaluation by WES, IQAS, or admissions to US/UK/Canada/Australia universities, you should request an official Conversion Certificate from your college or the AKTU registrar's office. This certificate states the (CGPA − 0.75) × 10 formula and is the document foreign evaluators rely on.
Explore other Indian-university converters and academic calculators built by the CGPA Pro team.
Convert your VTU CGPA to percentage instantly using the same (CGPA − 0.75) × 10 formula that Visvesvaraya Technological University uses.
Convert NowConvert Amity University CGPA using the officially approved CGPA × 10 formula by Amity's Controller of Examinations.
Convert NowConvert DU CGPA to percentage using the ×9.5 multiplier notified by Delhi University in 2018 for CBCS programmes.
Convert NowConvert your SPPU CGPA to percentage using the official formula for Savitribai Phule Pune University engineering programmes.
Convert NowConvert your Mumbai University CGPA to percentage with the 7.1 × CGPA + 11 formula used for engineering programmes.
Convert NowReverse your percentage back to CGPA using the AKTU formula — useful when applying for further studies or competitive exams.
Convert NowNote: Conversion rules apply to AKTU sessions from 2019‑20 onwards. Pre-2019 batches should verify with the relevant batch ordinance. Always confirm with your college's Examination Cell before submitting official applications.
Explore our complete collection of CGPA, SGPA, GPA calculators and university-specific converters designed for Indian and international students in 2026.
Explore All Tools